Technical Data; Ec Declaration Of Conformity - HSM shredstar S10 Operating Instructions Manual

Hide thumbs Also See for shredstar S10:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6
http://www.monomachines.com/
6 Cleaning
WARNING
Dangerous mains voltage!
Switch off the shredder and pull out
the mains plug.
When cleaning only use a soft cloth and a mild
soap-water solution. However, no water must
enter the equipment.

8 Technical data

Cutting type
Shred size
Sa fe ty ra ting German DIN 32757 – 1
Cutting ca pa ci ty DIN A4
Lo ading width
Cutting speed
Voltage
Operating mode
Max. operating time
Dimensions W x D x H
Weight
Volume of shred. mat. container

EC Declaration of Conformity

HSM GmbH + Co. KG, Austraße 1-9, 88699 Frickingen / Germany hereby declares that the machine, referred to here
as
document shredder HSM shredstar S10
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical specifi cations:
• EN 13857:2008
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 61000-3-3:2008
Frickingen, 10.01.2013
01/2013
http://www.monomachines.com/
2
80 g/m
1 3 " x 8 1 / 8 " x 1 5 3 / 8 "
• EN 55014-1:2006 + A1:2009
• EN 61000-3-2:2006 + A1:2009 + A2:2009
i.V. Hubert Kötzinger - Head of Environmental Engineering Product Development
shredstar S10
7 Disposal / Recycling
Electrical and electronic old devices
contain a variety of valuable materi-
als, but also hazardous substances
which were required for function and
safety. Incorrect disposal or handling
can be dangerous to your health and
the environment. Never dispose of old devices
in the household waste. Observe the current
applicable regulations and use the collection
points for returning and recycling electric and
electronic devices. Dispose of all the packaging
materials also in an environmentally-responsi-
ble way.
Strip cut
1/4" (6.3 mm)
1
10 sheets
8 11/16" (220 mm)
16.7 ft/min (85 mm/s)
220 - 240 V, 50 Hz
Brief operation
3 min
(328 x 207 x 391 mm)
6 lbs. (2.7 kg)
3.6 gal (16 l)
For More Info
Click Here --->
english
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents