Install The Ocx Activex (For Ie Only) - Pyle PIPCAMHD82 Quick Start Manual

2.5 Install the OCX ActiveX (For IE only)

Install the OCX ActiveX for the first time login; You will get tips after enter user and password in login page.
Download the OCX file, then double click to install it automatically.
After OCX installed fully, then input the user and password to login the camera.
2.5.1 For other Browsers, e.g., Safari, Firefox, Chrome, there is no need
to install the ActiveX control, see below:
User can input the ip address in the other broswers, select the view mode such as Server Puch; VLC, Quick
time to view
If User can not find the correct IP address,The default IP address for each camera is 192.168.1.155. You can
run the browser, and input the IP address directly into your browser to login to the camera.
NOTE: If the IP segment of the computer is different from the camera, such as 192.168.0.xx, please change
the IP segment of the computer's to the same as camera's, such as 192.168.1.xx, then connect the IP
Camera to the computer via network cable directly, run the browser, input the IP address and the login screen
below will pop-up:
12