Pyle PIPCAMHD82 Quick Start Manual page 10

-You will see the camera run through a full range of pan and tilt motion.
-When boot up completes, your camera's Ethernet port will flash yellow and
green lights indicating the camera is connected to your router.
If you do not see the flickering lights - DO NOT CONTINUE
please refer to the FAQ online
https://pyleaudio.helpshift.com/a/pyle-ip/?s=general&f=the-green-and-yellow-
lights-at-the-back-of-my-camera-do-not-flash-when-plugged-into-power-and-
ethernet
5) Copy/Paste or type the link below into your Internet browser to Download the
software package online
www.pyleaudio.com/manuals/drivers/pipcam8.zip
6) Unzip the zip file and select Mac or the other folder depending on your OS
7) Open the "IP Address Tool" folder and install the "SearchIPCam Setup" file on your
PC