Pyle PIPCAMHD82 Quick Start Manual page 58

Solution: modify the physical address of IP camera.
Possible Reason 5: Web port has been modified.
Solution: Contact as Network Administrator to obtain related information.
Possible Reason 6: Unknown.
Solution: Press RESET to restore to factory settings then connect it again, the default IP address is
192.168.1.155, subnet mask is 255.255.255.0
6. The color of image is abnormal (Green or other color)
Sometimes the IP camera images cannot be displayed properly because of different graphics cards, the
images appears to be green or other colors, then you should run the program "Config.exe" from the
downloaded OCT files.
(or run C:\windows\system32\Config.exe) to set the following parameters for the display buffer:
auto-detection, used display card memory or system memory, then run IE, connect IP camera again.
7. There is no voice while monitoring
Possible Reason 1: No audio input connection.
Solution: Check audio connection of the host.
Possible Reason 2: the relative audio option of IP camera is OFF.
Solution: Check audio parameter settings to see if you have set the audio option ON, but without external
audio input.
8. Image processing doesn't work properly
Possible Reason 1: System problem, DirectX function is disabled, which will cause slow display of images
and abnormal color.
Possible Reason 2: Hardware problem, graphics card doesn't support image acceleration and hardware
zooming functions. (For hardware issue, the only solution is to change your graphics card).
Solution: Install DirectX image driver, then click "Start">"Run">input "dxdiag", set enable "DirectDraw
Acceleration" "Direct3D Acceleration" "AGP Texture Acceleration" functions.
.
Figure 13.0
42