How To Check And Install Firmware Updates - Pyle SereneLife User Manual

Lets do a basic evaluation of your home wireless network.
First, I would recommend comparing your network speed with your wireless
speed.
1) Run a speedtest from a laptop of desktop connected to your router with a
wired connection.
http://www.speedtest.net/
2) Compare this value to your wireless network apps like "Speed Test" to see if
youhave enough available data in the area you would like to set the camera.
3) Test your network range
-What is your download speed in the same room as your wireless router?
-What is the download speed in the location you are trying to install the
camera?
-Is there a signi cant drop?
What to upgrade?
1) If your wired connection is too slow to reach the bandwidth requirements of
the camera you may need to consider upgrading your internet service.
2) If you have a signi cant drop in data when testing a wireless connection in
the same room as your router, you may want to consider upgrading to a
router that can provide higher data transmission speeds
3) If you see a signi cant drop in data when testing in the area you want to
install your camera you can either look for an upgraded router that will o er
additional range or you can expand your router range with a signal booster.
How to check and install rmware updates
Firmware updates ensure our new features will work 100% for your camera
It is a good idea to install them when you see they are available.
15