P2P Settings; Ftp Settings - Pyle PIPCAMHD82 Quick Start Manual

NOTE: Only one DDNS can be chosen, for example, if you use manufacturer's DDNS, the 3rd one won't work,
if you use a 3rd DDNS, the manufacturer's one won't work.

4.3.5 P2P Settings

User can see and change P2P GUID here
Factory will provide a factory P2P GUID for free using. Default user: admin; password: pylecam;User can
change the password here or change a new P2P GUID here.

4.3.6 FTP Settings

Set FTP service, Snapshots will be delivered to appointed FTP server when alarmed.
Enable FTP: Set FTP function ON/OFF.
FTP Server: Set FTP server address.
FTP Port: Set the port of FTP server, default is 21.
FTP User: Set the user name of FTP server.
FTP Password: Set the password of FTP server.
Upload Folder: Set the path of remote FTP server. Make sure that the folder you plan to store images exists.
(The camera cannot create the folder itself). Also, the folder must be erasable.
FTP Mode: It supports standard (POST) mode and passive (PASV) mode.
Click save to submit, click test to check the settings.
NOTE: When alarmed, there will be 3 snapshots sent to the FTP server every 1 second
31