Alarm Settings - Pyle PIPCAMHD82 Quick Start Manual

Click Save to save all the settings.
Click Update to refresh the settings.

4.5.2 Alarm Settings

External Alarm: Set external alarm function ON/OFF.
● Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s,
60s.
● Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.
● Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode
to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).
Alarm output: Select it to enable alarm output, unselect to stop.
SD-Card Record: Select it to enable record to SD card, unselect to stop.
Send E-mail: Select it to enable E-mail alert function, unselect to stop.
FTP Upload: Select it to enable FTP upload function, unselect to stop. .
Click Save to save all the settings.
Click Update to refresh the settings.
35