Quick Start Guide - Pyle PIPCAMHD82 Quick Start Manual

Find FAQs including setup video and support online at www.pipcamwireless.com
WIRELESS SETUP
1.
Download the App:
Download "Pyle IP Pro" in Apple Store or
Google Play
2.
Attach the wireless antenna to your
camera. Plug in your camera into power
in the SAME room as your home's
wireless router - wait 2 minutes for the
camera to pan and tilt through the full
range of motion
PIPCAMHD82

Quick Start Guide

3.
Reset the camera using a pin - Hold
in the reset pin for 10 - 12 seconds until
you hear an audible chirp. Wait again
1 - 2 min for the camera to reset and run
through the full range of pan and tilt
4.
Check in your mobile phone's system
settings that you are currently connected
to your home router's wireless network -
Setup will not work using cell data