Siemens simatic s7-1500 User Manual page 12

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● 9 electrically isolated analog inputs
● Measurement type can be set for each channel:
– Voltage
– Resistor
– Thermal resistor (RTD)
– Thermocouple (TC) including external compensation via CH 8 (reference channel)
● Resolution 16 bits including sign
● Two operating modes:
– Fast: shortest integration time 2.5 ms
– Standard: shortest integration time 7.5 ms
● Configurable diagnostics (per channel)
● Hardware interrupt on limit violation can be set per channel (two low and two high limits
per channel)
● Supports thermoresistors and thermocouples according to the GOST standard
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Module internal Shared Input (MSI)
Configurable submodules / submodules for
Shared Device
Scalable measuring range
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
12
Firmware version
of the module
(TIA Portal) as of V13,
SP1 and HSP 0166
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
(PROFINET IO only)
V1.0.0 or higher
(PROFINET IO only)
V1.1.0 or higher V14 or higher and
(only PROFINET IO)
Analog Input Module AI 8xU/R/RTD/TC HF (6ES7531-7PF00-0AB0)
Configuration software
STEP 7 GSD file in STEP 7
(TIA Portal) V12 or higher, or
STEP 7 V5.5 SP3 or higher
X
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
HSP 0186
(PROFINET IO only)
Manual, 09/2016, A5E36647959-AB
--- / X
X
X
X
X
X