VisionNet M505N User Manual page 98

Off
802.11N Only
Off
RIFS Advertisment
This is a legacy protocol
Off
This is used in environments
where multiple APs use the
OBSS Coexistence
same BSSID Name – but this can
open up the possibility of
hacking if not in a controlled
environment
Off
RX Chain Power
Save WMM is preferrable
Auto
MultiCast Rate
Default
Basic Rate
Disabled
This is only for Broadcom
Xpress Technology
wireless clients – We do not
suggest Proprietary Settings be
used ever
100%
You may wish diminish output
Transmit Power in MTUs where there are many
APs in the area – You cannot,
however, control other
Consumer Electronics
Enabled – This is required for
WMM higher speeds – only WMM
Advertise should be disabled
WMM No Disabled – some devices may
Acknowledgement not support this
This is a WMM Power save that
WMM APSD replaces the RX Chain power
save options
1.D Select the "Save/Apply"
DQ Technology, Inc. / VisionNet
Button.
Page 98 M505N User Manual Revision 3.2