VisionNet M505N User Manual page 27

Step 2: Configuring the WAN Interface
2.A Select the
DSL Latency
Select PTM
Priority
Select Connection
Mode:
Select ISP QoS
2.B Select "Apply Save"
You will see the Interface reflected
in the updated Interface Table
DQ Technology, Inc. / VisionNet
"WAN" tab located within the left-hand frameset.
ONLY Path0 Should be checked
Normal Priority
High Priority
(Pre-Emption)
Default Mode
Standard (Single Service)
VLAN MUX
Multiple VLANs over a single
PVC
Strict Policy
Standard for single service
config
Weighted Fair Queuing
Use multiple service
configurations
Page 27 M505N User Manual Revision 3.2