VisionNet M505N User Manual page 29

Step 2: Configuring the WAN Interface
2.A Select the
Select Connection
Mode:
Select Connection
Mode:
2.B Select "Apply Save"
You will see the Interface reflected
in the updated Interface Table
DQ Technology, Inc. / VisionNet
"WAN" tab located within the left-hand frameset.
ENET 1 – 4
ENET 4 Default OmniPort
Default Mode
Standard (Single Service)
VLAN MUX
Multiple VLANs over a single
PVC
Page 29 M505N User Manual Revision 3.2