Page 1
RADIO CONTROLLED WIRELESS WEATHER STATION User’s instructions 4 3 3 M H z THERMO SENSOR...
Page 3
The multifunctional weather station is equipped with many functions providing thorough weather information to you. The receiver unit has a clea r , easy-to-read display that shows weather forecast, minimum/maximum indoor and outdoor temperature, as well as time and date. It is able to receive and display readings from up to 3 remote sensors.
No. of remote unit: up to 3 units MAIN FEATHERS: WEATHER STATION: RF transmission range: maximum 80 meters free field Temperature sensing cycle: around 60-64 seconds Radio controlled signal: POWER Main unit: 3V, use 2 x AA 1.5V alkaline battery Remote sensor: 3V, use 2 x AA 1.5V alkaline battery...
Page 5
4. CLOCK TIME WINDOW USING THE T ABLE STAND OR WALL MOUNTING - Displays normal time, alarm time, date and day of the week. The receiver has both desktop and wall-mounting structure. 5. TIME key: Place the screw on the desired wall and hang the clock by - Press and hold it for 2 seconds to enter normal time the wall mount in the back of it or just simply place it on the setting.
- Press and hold it for 3 seconds to delete the minimum on the weather. In bad weather the displays will not and maximum temperature records. appear. New moon Waxing crescent First quarter Waxing gibbous 10. °C/°F key - Press it to switch between Celsius and Fahrenheit. - Press and hold it for 3 seconds to receive the RC signal for reception testing.
Page 7
thoroughly. Try out where the station TRANSMITTER receives the signals best. CHECKING AND DELETING MAX/MIN TEMPERATURE RECORDS 433MHz THERMO SENSOR Press “MAX/MIN” key once to check the maximum temperature records. Press it twice to check the minimum records. Press it again to exit. Press and hold “MAX/MIN”...
NOTE: Insert 2 x AA size batteries into the battery compartment. Make sure you insert them the right way according to the polarity information marked on the battery The alarm and snooze will be automatically turned on compartment. when setting the alarm time. Replace the battery door.
The 5 languages weekday settings are represented by ABOUT THE WEATHER INDICATOR the below abbreviations: GB= English FR= French DE=German ES= Spanish IT= Italian The built-in barometer can notice atmospheric pressure Press “TIME” key to confirm and exit the setting or let it changes.
DAYLIGHT SAVINGS TIME (DST) When used for the first time (after inserting the batteries or The clock has been programmed automatically to switch pressing the “RESET” key), the clock will start to receive the when the daylight savings time is in effect. Your clock will RC signal in 5 minutes with the signal strength indicator show “DST”...
Need help?
Do you have a question about the WS9620 and is the answer not in the manual?
Questions and answers