Do not install the electronic heater in the external supply duct connected to the AHU.
CAUTION
Electronic heater should
not be installed.
Discharge side
Final Checks and User Tips
To complete the installation, perform the following checks and tests to ensure that the air conditioner operates correctly.
Check the followings.
Strength of the installation site
Tightness of pipe connection to detect a gas leak
Electric wiring connections
Heat-resistant insulation of the pipe
Drainage
Earth conductor connection
Providing information for user
After finishing the installation of the air conditioner, you should explain the following to the user. Refer to appropriate pages in the
User's Manual.
1. How to start and stop the air conditioner
2. How to select the modes and functions
3. How to adjust the temperature and fan speed
4. How to set the timers
5. How to clean and replace the filters
When you complete the installation successfully, hand over the this Installation Manual and the wired controller
installation and user manuals to the user for storage in a handy and safe place.
NOTE
Suction side
Air Flow
Indoor unit
45