Table of Contents
Advertisement
The air conditioner should be used only for the applications for which it has been designed: the indoor unit is not suitable to be
installed in areas used for laundry.
Do not use the units if damaged. If problems occur, switch the unit off and disconnect it from the power supply.
In order to prevent electric shocks, fire or injuries, always stop the unit, disconnect power supply and contact SAMSUNG's
technical support if the unit produces smoke, if the power cable is hot or damaged or if the unit is very noisy.
Always remember to inspect the unit, electric connections, refrigerant piping and protections regularly. These operations
should be performed by qualified personnel only.
The unit contains moving parts, which should always be kept out of the reach of children.
Do not attempt to repair, move, alter or reinstall the unit. If performed by unauthorized personnel, these operations may cause
electric shocks or files.
Do not place containers with liquids or other objects on the unit.
All the materials used for the manufacturing and packaging of the air conditioner are recyclable.
The packing material and depleted batteries of the remote control (optional) must be disposed of in accordance with current
laws.
Please follow federal safe disposal requirements when disposing air conditioner containing refrigerants. You should also check
with your local environmental agency to make sure that you comply with any local or state regulations.
Installing the unit
IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines. Always
disassemble the electric lines before the refrigerant tubes.
Upon receipt, inspect the product to verify that it has not been damaged during transportation. If the product appears
damaged, DO NOT INSTALL it and immediately report the damage to the distributor or place of purchase.
After completing the installation, always carry out a functional test and provide the instructions on how to operate the air
conditioner to the user.
Do not use the air conditioner in environments with hazardous substances or close to equipment that release free flames to
avoid the occurrence of fires, explosions or injuries.
Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility from
both sides or ability to perform routine maintenance and repairs. The units' components must be accessible and that can be
disassembled in conditions of complete safety either for people or things.For this reason, where it is not observed as indicated
into the Installation Manual, the cost necessary to reach and repair the unit (in safety, as required by current regulations in force)
with slings, trucks, scaffolding or any other means of elevation won't be considered in-warranty and charged to end user.
Power supply line, fuse or circuit breaker
Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in
compliance with current local safety standards.
Always verify that a suitable grounding connection is available.
Verify that the voltage and frequency of the power supply comply with the specifications and that the installed power is
sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.
Verify circuit breaker size and fuses match unit specification.
Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring
diagram included in the manual.
Always verify that electric connections (cable entry, section of leads, protections...) are compliant with the electric
specifications and with the instructions provided in the wiring scheme. Always verify that all connections comply with the
standards applicable to the installation of air conditioners.
3
Hide quick links:
Advertisement
Table of Contents
