Attaching The Lens Port - Ikelite 6961.85 User Manual

5. Push the lid snaps toward the housing until they are flat against the
housing and the lock has engaged. Close opposing lid snaps at the
same time.
6. Check the Main O-ring seal. The o-ring should form a uniform, solid
line around the back of the housing. There will be a small, even
gap around the housing between the housing back and the housing
front.
Even Gap on
All Sides
Lid Snap

Attaching the Lens Port

A compatible lens port is required for waterproof operation.
Never submerge the housing without a lens port attached.
10
Lid Hook
Main O-ring
Housing Back