Jolly Mec STILE Installation, Use And Maintenance Manual page 26

1
M2-1-001
XXX
YYY
2 3
selection and open the next page. With DELAY TURN ON (or OFF) set, the main screen displays the time countdown until the set swi-
tch-on (or shutdown). The appliance can be switched on (or shutdown) at any time even in this situation by using the normal procedure,
by pressing Key 3.
1
Menu 03
XXX
YYY
3
2
1
Menu 04
XXX
YYY
2 3
WARNING:
if a thermostat is used, the contact connected to the electrical
terminal board must be CLEAN
26
Menu M2-1-001
XXX = DELAY
YYY = TURN ON
The DELAY Function settable from MENU 02 – SET CHRONO) con-
sents to set the offset time before switching-on and after scheduled
shutdown on the appliance.
When the appliance is OFF, set DELAY TURN ON for deferred ap-
pliance start or, with the appliance in RUNNING, set DELAY TURN
OFF to program shutdown. The function is disabled when set to
4 6
00:00. Once the required delay is set, press Key 4 to confirm the
Menu 03
XXX = SET
YYY = LANGUAGE
Setting the desired language.
SETTING THE LANGUAGE:
1. button 4
2. press button 6 to reach the SET LANGUAGE page, press button
3. 4 to confirm
4 6
4. press button 1 or 2 to change the language, press button 4 to confirm
5. press button 3 to exit, press repeatedly to reach the home page
Menu 04
XXX = SET
YYY = PROBE
Setting the ambient probe type. There are two types of probes
available: analog temperature reading probe or on-off contact
probe.
PROBE SETTINGS:
4 6
1. button 4
2. press button 6 to reach the SET PROBE page, press button 4
to confirm
3. press button 1 or 2 to change the year, press button 4 to confirm
4. press button 3 to exit, press repeatedly to reach the home page