Jolly Mec STILE Installation, Use And Maintenance Manual page 24

10:30
25°C P3
XXX
YYY
Stove running mode:
The WORK message informs the user that the stove is in "OPERATING MODE" i.e. it has reached the preset heating output level. The
stove operating level is set using buttons 5 or 6 and increasing or decreasing the value displayed on the first row with the same status.
There are 5 heat output levels.
The ambient temperature can be SET pressing buttons 1 or 2, which are also used to adjust the temperature to the desired value. The
stove remains in operating mode; i.e. at the heat output level, until the set ambient temperature is exceeded by 0.5°C, a condition required
to trigger the ECO function. To restart the heating mode, the ambient temperature must decrease to 1.0°C below the SET temperature.
The fan speed for the hot air exhausted through the grid depends on the output levels; the higher the output level, the faster the air will
be pumped through the front grid.
10:30
25°C P3
XXX
10:30
25°C P3
XXX
21.0 °C
XXX
YYY
03
XXX
YYY
SIL
XXX
YYY
24
Example of display message with the stove in FLAME STABILI-
SATION MODE.
xxx
= FLAME
YYY = ON
Example of display message with the stove in RUNNING mode.
XXX = WORK
Example of display message with the stove in ECO mode.
xxx
= ECO
YYY = MODULAT-
Example of display message when adjusting the AMBIENT TEM-
PERATURE SETTING.
xxx
= SET TEMP
YYY = ROOM
Example of display message when adjusting the HEAT OUTPUT
SETTING.
xxx
= SET
YYY = POWER
Silent mode setting
When the Silent mode is activated, the product is set to work as
silent as possible.
To set the SILENT mode, press key 5 on the main page to imme-
diately open the relevant section. Using keys 5 and 6, set the mode.
After selecting SIL, press key 3 to return to the main page.
xxx
= SET
YYY = POWER