Lectronics Wideband Installation Manual page 20

Venue Wideband Receiver
5. When the driver installation is complete, the final
page of the Wizard appears. Click "Finish" to close
the Found New Hardware Wizard.
USB Driver Installation (Windows XP) -
Subsequent Installations
The Windows XP operating system regards all Lec-
Net2 devices as separate USB devices because each
™
has a unique serial number. Windows XP will want to
install the USB driver every time it encounters a Lec-
Net2 device whose serial number it does not recog-
™
nize. The process is simplified if the LecNet2
driver has already been installed at least once on the
computer system. Use the following procedure if the
LecNet2 USB driver was previously installed on the
™
computer system.
1. On the first page of the Wizard, select Install the
software automatically Recommended) then click
"Next >".
2. Windows will discover the previously installed
driver. If a dialog box opens warning you that the
driver has not passed Windows Logo Testing, click
"Continue Anyway."
20
3. When the driver installation is complete, the final
page of the Wizard appears. Click "Finish" to close
the Found New Hardware Wizard.
USB
™
USB Driver Installation (Windows 2000) -
First Time
Use the following procedure when a LecNet2
connected to the Windows 2000-based PC for the first
time.
1. Connect a USB cable between the Venue Receiv-
er's USB port and the USB port on the computer
system. Place the LecNet2
PC's CD-ROM drive and click "Next >" to display
the next page.
device is
™
Installation Disk in the
™
LECTROSONICS, INC.