Audiovox LCM58N Operation Manual page 8

Invoking the Setup Menu
Press all three buttons at the top of the monitor at the same
time.
The Setup Menu appears
Brightness will be highlighted in red.
Press + or – to select Day or Night highlighted in red. Day
selection will be bright, Night will be dark.
Note: If brightness control is set for Night, It will return to Day
mode whenever the Ignition is turned off for more then 30
seconds.
1. Press the menu button to highlight Loudspeaker in red
2. Press + or – button to select ON or Off.
- VIDEO MENU (AUX cable : Connection, Navigator cable : Connection)
* VOLUME : This function is used to control the audio volume.
* BRIGHTNESS : This function is used to control the overall
brightness of the picture displated on the monitor.
* COLOR : This function is used to increase or decrease the overall
color saturation of the picture displayed on the monitor.
* CONTRAST : This function is used to increase or decrease the
overall contrast of the picture displayed on the monitor.
* TINT : This function is used to increase or decrease the overall color
schme of the picture displayed on the monitor.
* DISPLAY MODE (NORMAL, FULL SCREEN, CINEMA) : Make
reference to 9 page. .
-8-