Tension Release Bar - Pfaff 1245 Instruction Manual

11.

Tension release bar

05.15
11 - 36
1. With the cut-off mechanism in resting position and the presser foot raised, there must
be a distance of approx.
2. When the point of thread catcher
of the needle plate (see arrow) with the presser foot resting on the needle plate, the
tension discs must be loosened to such an extent that the needle thread can be easily
pulled through them.
Fig. 11 - 30
Taking care to ensure that the cut-off mechanism is in resting position, raise the presser
foot.
Loosen screws .
Set transmission bar
On machines without automatic presser-foot lifter (subclass -910/..), bracket
must be unscrewed to obtain access to screws .
By turning the handwheel, bring the machine to needle rise position and manually
activate the engaging lever.
between the left edge of release bar
is at the same height as the rear edge of stop trip
(screws ) to the height stipulated in
and housing .