11.
Knife
05.12
(On Model 1246 make these adjustments on both knives.)
1. The elongated hole of knife
be touching the casting (see arrow).
2. When the point of needle catcher
the knife, knife
Fig. 11 - 27
Loosen screws .
Move knife 3 in such a way that it cannot collide with thread catcher .
Taking care to ensure that screw
accordance with
Bring knife
In this position tighten screws .
Screw
must be parallel to knife carrier
must just touch thread catcher .
.
to rest against thread catcher
remains loosened for the following adjustment.
protrudes approx.
is loosened, manually turn thread catcher
and align it in accordance with
and the knife must not
over the cutting edge of
in
11 - 31