Pfaff 1245 Instruction Manual page 50

11 - 10
Fig. 11 - 08
adjustable clamp is touching the needle bar bearing.
Position the hook point at the middle of the needle, taking care to ensure that the needle
is not pressed by needle guard .
While ensuring that bevel pinion
much play, tighten screws .
On machines with automatic thread trimmer -900/56, bring retaining collar
bevel pinion and tighten screws .
Adjust the needle height in accordance with
Align needle guard in accordance with
Bei der PFAFF 1246 ist nach Veränderung des Nadelabstandes unbedingt die
Verbindungsstange zum Fadenabschneider (siehe auch
neu zu justieren.
is not too close, and that the hook does not exhibit too
to rest on
(see also
)