Procedure 2 Connector Check And Replacement Check; Satellite U300 And Satellite Pro U300 Maintenance Manual(960-Q08) - Toshiba Satellite U300 Maintenance Manual

Procedure 2
The connection of cable and board may be defective. Otherwise, they may be faulty.
Disassemble the computer following the steps described in Chapter 4, Replacement
Procedures, and perform the following checks:
Check 1
Check 2
Check 3
36
Manual(960-Q08)
Downloaded from www.Manualslib.com
Connector and Replacement Check
Make sure the cable is firmly connected to system board.
If the connection is loose, reconnect firmly and repeat Procedure 1. If the problem
still occurs, go to Check 2.
Touch Pad or the cable may be faulty. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures. If the problem still occurs,
perform Check 3.
System board may be faulty. Replace it with a new one following the instructions
in Chapter 4, Replacement Procedures
manuals search engine
2 Troubleshooting Procedures
Satellite U300 and Satellite Pro U300 Maintenance