Procedure 2
The connection of cable and board may be defective. Otherwise, they may be faulty.
Disassemble the computer following the steps described in Chapter 4, Replacement
Procedures, and perform the following checks:
Check 1
Check 2
Check 3
34
Manual(960-Q08)
Downloaded from
www.Manualslib.com
Connector and Replacement Check
Make sure keyboard cable is firmly connected to system board.
If the connection is loose, reconnect firmly and repeat Procedure 1. If the problem
still occurs, go to Check 2.
Keyboard may be faulty. Replace it with a new one following the instructions in
Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3.
System board may be faulty. Replace it with a new one following the instructions
in Chapter 4, Replacement Procedures.
manuals search engine
2 Troubleshooting Procedures
Satellite U300 and Satellite Pro U300 Maintenance