Toshiba Satellite U300 Maintenance Manual page 204

Replacement Procedures
Installing an optical disk drive
The following describes the procedure for installing an optical disk drive (See Figure 4-11
and 4-12).
1. Attach the ODD bracket to an optical disk drive and secure it with the following
2. Insert an optical disk drive assembly into the slot and connect it to the connector
3. Secure the ODD drive with the following screw.
Downloaded from www.Manualslib.com
Figure 4-12 Disassembling the side bracket
screws.
• M2.0×3.0 Flat BIND screw
CN26 on the system board.
M2.5X6.0 Flat BIND screw X1
4-26Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08)
manuals search engine
x2