4.16
Removing the Bluetooth
Remove the Bluetooth according to the following procedures and Figure 4.31.
1. Disconnect the Bluetooth cable from the motherboard.
2. Remove the Bluetooth from the cradle by prying upward on the upper outside edge as
3. Remove the Bluetooth.
Installing the Bluetooth
Install the Bluetooth according to the following procedures.
1. Seat the Bluetooth in the correct position and snap it into place.
2. Connect the cable to the motherboard.
Satellite A660/ProA660 Series Maintenance Manual
Downloaded from
www.Manualslib.com
Bluetooth
shown in Figure 4.31.
Figure 4.31 Removing the Bluetooth
manuals search engine
4 Replacement Procedures
4-41