Dryer Use - Admiral 3RAED3005 User Instructions

WARNING
Explosion Hazard
Keep flammable materials and vapors, such as petrol,
away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
This booklet covers several different models. Your dryer may not
have all of the cycles and features described.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Clean lint screen before each load. See "Cleaning the Lint
Screen."
2. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
3. Turn the Cycle Control knob to the recommended cycle for the
type of load being dried. Use the Energy Preferred Automatic
Setting (*) to dry most heavy to medium-weight fabrics.
4. If your dryer has a Temperature selector, set it to the
recommended setting for the type of fabric being dried. See
"Drying, Cycle and Temperature Tips."
5. (OPTIONAL) Your dryer may have an End of Cycle Signal. The
signal is helpful when drying items that should be removed
from the dryer as soon as it stops.
The End of Cycle signal is part of the Start button and is
selectable. Turn the Start button to ON or OFF. The signal will
sound only if the selector is set to On.
6. If desired, add fabric softener sheet. Follow package
instructions.
7. Press the Start button.
6

DRYER USE

Starting Your Dryer
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using a No Heat Fluff cycle.
Failure to follow these instructions can result in death
or fire.
You can stop your dryer anytime during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
Close the door. Select a new cycle and temperature (if desired).
Press the Start button.
Drying, Cycle and Temperature Tips
Select the correct cycle and temperature for your load.
Cool Down tumbles the load without heat during the last few
minutes of all cycles to make the load easier to handle.
Drying tips
Follow care label directions when they are available.
If desired, add a fabric softener sheet. Follow package
instructions.
Remove the load from the dryer as soon as tumbling stops, to
reduce wrinkling. This is especially important for permanent
press, knits and synthetic fabrics.
WARNING
Fire Hazard
Stopping and Restarting