BenQ MD SERIES User Manual page 5

•Please follow the national guidelines for unit disposal.
•This product cannot be used for a life-support system.
•The unit is for exclusive interconnection with IEC 60XXX certified equipment outside of
patient environment and IEC 60601-1 certified equipment inside the patient environment.
•This device complies with EN60601-1. To minimize the interference from other equipment, a
minimum 0.5 meters distance shall be kept form other potential electromagnetic sources,
such as the Cell Phone.
•The MD210G with a maximum resolution of 1600 x 1200 (landscape mode) or 1200 x 1600
(portrait mode) pixels is intended for reviewing medical imaging. The inputs include DVI-D or
DisplayPort connectors for use with any Plug and Play graphics cards.
•The MD310C/MD310G with a maximum resolution of 2048 x 1536 (landscape mode) or
1536 x 2048 (portrait mode) pixels are intended for reviewing medical imaging. The inputs
include DVI-D (dual link) or DisplayPort connectors for use with any Plug and Play graphics
cards.
•To reduce the inadvertent hazards, DO NOT lift up the monitor by holding the base of the
monitor.
•To have the best performance of this product, it's recommended to replace the panel after it
has been used for 3 years.
Warning
•Do not touch a damaged LCD panel directly with bare hands. The liquid crystal which leaks
from the panel is poisonous if it enters the eyes or mouth.
•Do not leave the LCD screen facing the sun as it can damage the LCD screen. Take care when
you place the unit by a window.
•Do not push or scratch the LCD monitor's screen. Do not place a heavy object on the LCD
monitor's screen. This may cause the screen to lose uniformity of clarity, color, or brightness.
•If the unit is used in a cold place, a residual image may appear on the screen. This is not a
malfunction. When the monitor becomes warm, the screen returns to normal.
•If a still picture is displayed for a long time, a residual image may appear. The residual image will
eventually disappear.
•Avoid keeping a static picture on this monitor, or it may cause a "screen burn-in" (image
retention).
•"Screen burn-in" (image retention) is not covered under warranty.
•The screen and the cabinet become warm during operation. This is not a malfunction.
•The LCD monitor becomes hot when it's working, please do not touch the panel and plastic
enclosure over 10 seconds, and do not touch the mental enclosure on the back of the LCD
monitor over 1 second.
•No open or modification of this equipment is allowed. Refer all servicing to qualified service
personnel.
5