Operation; Control Panel - Grundfos RSI Series Installation And Operating Instructions Manual

5. Operation

Warning
Check all electrical connections before
powering up the system.
Warning
The heat sink becomes hot during running
and stays hot for a long time. Touching it
while it is hot will cause burns.
In case of altitudes over 1000 m, the
Caution output current should be reduced by 10 %
for every 1500 m increase in altitude.
Adjust control parameters according to the
Note
steps indicated in this manual before the
first start.

5.1 Control panel

The Renewable Solar Inverter control panel is shown
in fig. 6 below. The control panel has four LEDs, a
digital display and nine operating keys.
Control panel layout
Fig. 6
Indicator lights and keys
On On indicator light
Run Run indicator light
FLT Fault indicator light
Ready Ready indicator light
Return key
Home key
Digital display control panel
Operating keys
(The function of the keys is shown in the
table below.)
Mode indicator lights (LEDs):
On
RUN
FLT (FAULT)
Ready
Function description
Yellow On: Inverter is on.
Green On: Inverter is running.
Red On: System fault.
Yellow On: System is ready to run.
Returns to previous screen in the control panel and is
used to reset faults.
Returns to home screen in the control panel.
9