Set Time, Date, Temperature Unit; Time Setting Order; Set Time Alarm; Activate/Deactivate Time Alarm - Lacrosse WS-9037U-IT Quick Setup Manual

Step 1: Insert the 2 new AA batteries (not included) into the
TX29UDTH-IT remote sensor. Observe the correct polarity.
Step 2: Insert the 3 new AA" Alkaline batteries (not included) into the
weather station. Observe the correct polarity
Restart: If there is no remote temperature data after 3 minutes, unplug the AC
adapter and remove batteries from the weather station & remote sensor for 15
minutes. Return to Step 1 above.
1. Hold the SET button to enter SET mode.
2. Press the OUT/+ button to adjust the values.
3. Press the SET button to confirm adjustments and move to the next
item.

Time setting order:

1. Contrast 1-7
2. Time Zone - 7 time zones
3. DST (Daylight Saving Time On/Off)
4. RCC ON/OFF (WWVB signal)
5. 12/24 hour time format
6. Hour
7. Minutes
8. Year
9. Month
10. Date
11. Fahrenheit/Celsius
12. InHg or hPa (Pressure unit of measure)
13. Relative pressure
14. Forecast Sensitivity (low for ocean, high for desert)
Press the SET button to exit, or wait 20 seconds without pressing
buttons to return to the normal time display.
1. Hold the ALM/DATE button to enter alarm
SET mode. Hours and minutes will flash
together.
2. Press the IN button to set the hour and the OUT/+ button to adjust
the minutes.
3. Press the SNOOZE/CH button to confirm & exit.
Model: WS-9037U-IT www.lacrossetechnology.com/support Page | 2

Set Time, Date, Temperature Unit

Set Time Alarm

Activate/Deactivate Time Alarm

This clock has time zones
from GMT 0 to +/-12h
North American time zones:
-4 h - Atlantic
-5 h - Eastern (default)
-6 h - Central
-7 h - Mountain
-8 h - Pacific
-9 h – Alaska
-10 h -Hawaiian