Outdoor Sensor Reception Icon; Wwvb Radio-Controlled Time; Position Temperature Station On Wall Or Tabletop; Position Outdoor Transmitter - Lacrosse WS-9037U-IT Quick Setup Manual

Wireless forecast station with pressure history
Table of Contents

Advertisement

When the signal is successfully received from the outdoor
transmitter, the icon will flash every 4 seconds when it
updates.
The icon will flash every second when searching for the outdoor
transmitter signal.
If reception is not successful, the icon will not be shown in LCD.
For info visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm

Position Temperature Station on Wall or Tabletop

Hang on wall with wall hang hole on back of temperature station.
Use the fold out stand to set on desk or table.
Mount the outdoor transmitter on a North-facing wall or in any
well shaded area. Under an eave or deck rail is preferred.
The maximum transmitting range to the temperature station is
over 330-feet (100 meters) in open air, not including walls.
Low Battery Icon – Warns to Replace Batteries
Temperature Station: Icon displays in Indoor LCD section
Transmitter: Icon displays in Outdoor LCD section
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium, or Rechargeable Batteries
Always purchase the correct size and grade of battery suitable for
the intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to
battery installation.
Ensure the batteries are installed correctly in regard to polarity
(+/-).
WS-9080U-IT

Outdoor Sensor Reception Icon

WWVB Radio-Controlled Time

Position Outdoor Transmitter

Care and Maintenance
www.lacrossetechnology.com/support
WWVB
icon
Page | 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents