Table of Contents
Advertisement
•
Once connected, the icon will show for 3 seconds when outdoor
temperature update is received.
•
The channel indicator will show below the reception icon.
•
Press the SNOOZE/CH button to view sensors on other
channels.
Note: Channel 1 will not show if only one sensor is
connected.
1. Insert batteries into sensor 1
2. Insert batteries into the forecast station
3. When outdoor temperature appears, insert batteries into sensor 2
4. When channel 2 appears insert batteries into sensor 3
5. Keep the forecast station and all sensors together for 15 minutes.
•
The bar chart indicates the air pressure history
trend over the last 24 hours.
•
The columns represent the pressure change
("InHg" or "hPa") readings at specific times.
•
The "0" is equal to the current pressure and
each bar represents how past pressure was
compared to the current pressure.
•
Read the graph from left to right. If the bars are rising, it means that
the weather is getting better due to the increase of air pressure.
•
If the bars go down, it means the air pressure has dropped and the
weather is expected to get worse from the present time.
•
The numeric barometric air pressure reading is displayed directly
under the weather forecast icon. You can set this to your local
reporting station through the program menu
Manual WWVB Atomic Time Signal Search
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
The forecast station will search for 1 hour between midnight and 6am
until the WWVB time signal is received. After reception, the forecast
station will only search for the atomic signal after midnight.
•
The low battery icon will show when the forecast station
needs fresh batteries.
Model: WS-9037U-IT www.lacrossetechnology.com/support Page | 5
Setup with Multiple Sensors
24 Hour Pressure History Graph
Low Battery Icon
.
WWVB
ATOMIC
ICON
Low Battery
2
Outdoor
Channel
Icon
Icon
Hide quick links:
Advertisement
Table of Contents
