Loading Paper Into The 2Nd Paper Tray - Develop D 1650iD User Manual

3

Loading Paper Into the 2nd Paper Tray

Load paper into the 3rd, 4th and 5th paper trays using the same procedure
described below.
1
Pull out the 2nd Tray.
2
Press down on the Paper-Lifting
Plate until it locks into place.
3
Load the paper into the tray so that
the front side of the paper (the side
facing up when the package was
unwrapped) faces up.
?
Have the necessary precautions
been observed when loading
the paper?
§ Do not load so much paper that
the top of the stack is higher than the
4
Slide the paper guides against the
edges of the paper.
?
Is the paper guide positioned
correctly?
§ Make sure that the paper guides
are pushed up against the
edges of the paper.
3-6
Basic Operations
Paper-Lifting Plate
mark.
D 1650iD/D 2050iD