3
3.4
Stopping/Restarting/Cancelling a Copy Job
Follow the procedure described below to stop a copy job.
1
Specify the copy settings, and then press the [Start] key.
Copying begins.
2
During printing, press the [Stop]
key.
The message "PLEASE WAIT!"
appears, and printing is stopped.
?
How can the stopped job be
restarted?
§
When the message "PRESS
THE START KEY TO RESUME"
appears, press the [Start] key.
Printing continues.
?
How can the stopped job be
cancelled?
§
When the message "PRESS THE START KEY TO RESUME"
appears, press the [No] key.
The message "COPY CANCELED" appears, and the job is
cancelled.
3.5
Confirmation Mode [CD]
The number of operations performed since this machine was installed can
be checked using the functions available when the [Status] key is pressed.
For further information, see "3 Basic Operations" in the extended
manual on the CD-R.
3.6
Reducing Electricity Usage [CD]
The Sleep and Auto Power-off modes are extremely useful for conserving
energy.
For further information, see "3 Basic Operations" in the extended
manual on the CD-R.
3-12
Basic Operations
Stop
Restart
Cancel
D 1650iD/D 2050iD