Explanation Of Basic Concepts And Symbols; Paper Feeding; Width" And "Length - Develop D 1650iD User Manual

1
1.4

Explanation of Basic Concepts and Symbols

The use of words and symbols in this manual are explained below.

Paper Feeding

During printing, paper is supplied from the right side of the machine and
fed into the output tray on top or the output option at the left with the
printed surface of the page facing down. The paper feed direction is
shown by the arrows in the diagram below.

"Width" and "Length"

Whenever paper dimensions are
mentioned in this manual, the first value
always refers to the width of the paper
(shown as "X" in the illustration) and the
second to the length (shown as "Y").
1-4
Introduction
D 1650iD/D 2050iD