Copying Onto Manually Fed Paper By Manual Bypass - Develop D 1650iD User Manual

Before Making Copies

Copying Onto Manually Fed Paper by Manual Bypass

1
Load the document to be copied.
Refer to "Loading the Document" on page 3-8.
H
2
Adjust the paper guides to fit the
size of the paper.
3
Insert one sheet of paper with the
front side facing down, lightly sliding
the paper as much as possible into
the feed slot.
The manual bypass mark (
appears in the bottom line of the
screen.
?
Is a card or a postcard loaded?
§
Make sure that it is not curled (rolled).
4
Press the [No] key.
The "PAPER SOURCE SETUP" menu appears.
5
Use the
the type of paper loaded.
H Select from the following four
paper type settings.
"PLAIN"
"OHP"
"CARD"
"ENVELOPE"
6
Press the [Yes] key.
The "PAPER SIZE" menu appears.
D 1650iD/D 2050iD
)
and keys to select
5
5-11