Loading Paper Into The Bypass Tray - Develop ineo 223 Quick Manual

1

Loading paper into the bypass tray

Paper can be fed manually through the bypass tray when you wish to print onto paper of a size that is not
loaded into a paper tray, or when you wish to print onto envelopes, OHP transparencies or other special
paper.
Follow the procedure described below to load paper into the bypass tray.
1
Open the bypass tray.
% When loading large-sized paper, pull out the tray extension.
2
Load the paper into the tray.
% Load paper so that the side to be printed on faces downward.
% Do not load so many pages that the top of the stack is higher than the , mark.
% Up to 150 sheets plain paper can be loaded.
% Slide the lateral guides to fit the size of paper to be loaded.
1-48
Loading paper 1.17
ineo 223/283/363/423