Table of Contents
Advertisement
3.11
VESA Brackets Installation
1.
Upside down the device first on a flat and clear floor.
2.
Both of DS-980/DS-980GL configurations, using the middle of screw holes to
install the mounting brackets (number 2) by 4 screws (number 1) (M3x6L).
3.
Gently place VESA bracket (number 3) on the mounting brackets with the right
holes which mark DS-9XX printings and tighten 4 screws (number 4) (M4x 10L)
with the opposite directions to the monitor.
Note!
Please select the suitable screws and consider your loading of the
safety value when you install DS-980/DS-980GL behind to the monitor,
(DS-980/DS-980GL with expansion configuration weight is 3.8kg; light
configuration is 3.1kg)
1
1
1
2
4
4
Figure 3.12 VESA brackets installation
27
3
1
2
4
4
DS-980/DS-980GL User Manual
Advertisement
Table of Contents
