Ds-980/Ds-980Gl Front External I/O Connectors; Power On/Off Button; Ethernet Connector (Glan) - Advantech DS-980 User Manual

2.2

DS-980/DS-980GL Front External I/O Connectors

2.2.1

Power ON/OFF Button

DS-980/DS-980GL has a power ON/OFF button on front side. Push this button to
turn the system ON and OFF. It can also support 4 second delay soft power off.
2.2.2

Ethernet Connector (GLAN)

DS-980/DS-980GL provides 2 x RJ-45 (LAN1: Intel I219 with Phy only, LAN2: Intel
I211 with Phy & Mac), and wake on LAN supported. They are fully compliant with
IEEE 802.3u 10/100/1000 Base-T CSMA/CD standards. The Ethernet port provides
a standard RJ-45 jack connector with LED indicators on the front side to show its Link
(On)/ Active (Flash) and speed status which is with its green color by 100Mbps (On)/
10Mbps (Off) and its orange color by 1000Mbps (On).
Table 2.1: GLAN Connector Pin Assignments
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DS-980/DS-980GL User Manual
Figure 2.5 Power button
Figure 2.6 GLAN connector
Signal Name
MDI0+
MDI0-
MDI1+
MDI1-
GND
GND
MDI2+
MDI2-
MDI3+
MDI3-
VCC
ACT
Link100#
Link1000#
10