Adjusting The Left/Right Margin (Cassette) - Canon iR C3200 Series Portable Manual

Chapter 2
2.5±1.5mm
(2nd side of duplex
copy: 2.5±2.0mm)
0 2 5 4 6 8 101214161820
Adjusting the Left/Right Non-Image Width
1) Make the following selections in service mode, and
see that the non-image width is as indicated:
COPIER>ADJUST>ADJ-XY>ADJ-Y.
2.5±1.5mm
(2nd side of
double-sided
copy: 2.5±2.0mm)
0 2 5 4 6 8 101214161820
Adjusting the Leading Edge Non-Image Width
1) Make the following selections in service mode, and
see that the non-image width is as indicated:
COPIER>ADJUST>ADJ-XY>ADJ-X.
Decrease the
value of ADJ-Y.
(A decrease of '10'
will decrease
the non-image
width by 1 mm.)
10
2.1.3 Adjusting the Left/
Right Margin (Cassette)
1) Slide out the cassette 1/2, and open the pickup
vertical path cover.
2-2
Decease the
value of REGIST.
(A decrease of '10'
will increase
the margin by 1 mm.)
Leading edge of paper
Increase the
value of REGIST.
(An increase of '10'
will decrease
the margin by 1 mm.)
F-2-5
Decrease the
value of ADJ-X.
(A decrease of '10'
will decrease
the non-image
width by 1 mm.)
Image leading edge
Increase the
value of ADJ-X.
(An increase of '10'
will increase
the non-image
width by 1 mm.)
F-2-6
Edge of image
Increase the value of ADJ-Y.
(An increase of '10' will increase
the non-image width by 1 mm.)
2.0±1.5mm
(2nd side of double-sided
copy: 2.5±1.5mm)
0
2
4
5
6
8
F-2-7
0000-5347
2) Remove the 2 screws [1], and detach the right front
cover [2].
3) Detach the grip [1] found at the right front. (If
only the cassette 2.)
4) Insert a screwdriver through the hole in the right
front stay, and loosen the screw [1] to adjust the
position of the adjusting plate [2].
F-2-10
F-2-8
F-2-9