Starting The Unit; Stopping The Unit - Echo DSRM-300 Original Instructions Manual

 Never attempt to operate the product with one hand.
 Ensure that you hook your thumbs around the grips, wrapping them in your
thumb and remaining fingers.
 Never operate overreach the unit and to keep the balance at all times, to always be sure of the footing on slopes and
to walk, never run.
 Never to operate the unit with defective guards or shields, or without safety devices, or if the cord is damaged or
worn.

Starting the unit

 The attachment will operate when the battery is installed, the power indicator LED is lit, and the trigger switch and
trigger switch lockout are engaged. Make sure the product is properly positioned to prevent loss of control and pos-
sible serious injury.

Stopping the unit

 The cutting attachment continues to run for a short period after the unit is switched off.
WARNING
WARNING
1. Push power button (A) once to turn on power to unit.
 Power indicator LED (B) illuminates when power to unit is
turned on.
2. Hold down trigger switch lockout (C) and depress trigger
switch (D) to increase RPM to operating speed.
 When power to the unit is turned on:
 After one minute of inactivity, unit will power itself off.
 If the LED remains lit, operation is normal.
 If the LED flashes once per second, the battery needs to
be charged.
 If the LED flashes four times per second, there is a fault
within the product. Turn power off to unit. Remove bat-
tery. Clear debris from around line head. Install battery.
Turn power on to unit. If flashing continues, have your au-
thorized servicing dealer repair the product.
WARNING
1. Release trigger switch and trigger switch lockout, and allow
trimmer head to stop.
2. Push power button (A) to turn off power to unit.
 Power indicator LED (B) turns off when power to unit is
turned off.
 If the trimmer head does not stop when the trigger and trig-
ger lockout are released, push power button to turn off and
remove the battery to stop the power supply to product.
Have your authorized servicing dealer repair power button
before using product again.
15
Operation
IMPORTANT