Setting The Sensitivity - Pentax Optio V10 Operating Manual

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
4
Auto (default setting) Sensitivity is automatically adjusted to between ISO 50 and 800.
50
100
200
400
800
1600
3200
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The Sensitivity setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
90
2, 3, 4
5
1, 6
b R A q < z e i \ Q E D Y
• The lower the sensitivity, the less noise that affects the image.
The shutter speed will be slower in low light conditions.
• Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be
affected by noise.
Rec. Mode
8
M
MENU
AWB
ISO
AUTO
Exit Exit Exit
MENU
8
M
AWB
ISO
AUTO
MENU
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
Sensitivity
1/3
Rec. Mode Auto
50
Recorded Pixels
100
Quality Level
200
White Balance
400
Focusing Area 800
1600
Sensitivity
3200
Cancel
OK
OK