Taking A Series Of Pictures - Pentax Optio V10 Operating Manual

Taking a Series of Pictures

In this mode, pictures are taken continuously as long as the shutter
release button is pressed.
Each time a picture is taken, the image is saved in the memory
Continuous
1
before the next image is taken. The higher the image quality, the
Shooting
longer the interval between shots.
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller (45)
to select 1 (Continuous Shooting)
and press the 4 button.
The camera is ready to take a series of
pictures.
3
Press the shutter release button
halfway.
The focus frame on the LCD monitor turns green if the subject is in
focus.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
• The flash does not discharge in Continuous Shooting mode.
• The continuous shooting function is not available in s, b, A, d,
O, z, e or Y mode.
• You can continue shooting until the memory capacity of the SD
Memory Card or built-in memory is full.
• The interval of continuous shooting will vary according to the
Recorded Pixels and Quality Level settings.
• The focus, exposure and white balance are locked with the first image.
3, 4
1, 2
2
R q < i \ c Q E D
Drive Mode Drive Mode
Continuous Shooting Continuous Shooting
4
OK OK OK
73