Displaying Shooting Information - Pentax Optio V10 Operating Manual

Displaying Shooting Information

The LCD monitor display changes in the following sequence each time you
press the 4/W button: Normal Display, Histogram + Info, No Info.
For details of each display mode, refer to "Monitor Indications" (p.16).
• S appears if the shutter release button is pressed halfway when
camera shake is likely to occur. To prevent camera shake, use a
tripod and the self-timer function. (p.72)
• In s mode, the Green Mode screen appears. (p.66) You cannot
change the information displayed on the LCD monitor by pressing
the 4/W button.
• Only z or e and the focus frame are displayed on the LCD
monitor in z and e modes. Other shooting information is not
displayed. You cannot change the information displayed on the
LCD monitor by pressing the 4/W button.
• In Y mode, Histogram does not appear even when switched to
Histogram+Info.
Normal Display
10/10/2007 10/10/2007
+1.0 +1.0 +1.0 14:25 14:25 14:25
Histogram + Info
8
ISO ISO ISO 200 200 200
1/250 1/250 1/250
F3.3 F3.3 F3.3
+1.0 +1.0 +1.0
No Info
38 38 38
38 38 38
M
4
77