Pentax Optio V10 Operating Manual page 69

• If any other functions have been assigned to the Green button, the
camera does not switch to s mode. The assigned function is
displayed. (p.55)
• In s mode, you cannot change the information displayed on the
LCD monitor by pressing the 4/W button.
• You cannot use the [A Rec. Mode] menu
or Capture Mode Palette in s mode. If
you try to display the [A Rec. Mode]
menu or Capture Mode Palette, - (key
lock icon) and a message appear.
• If you switch to Q mode from s mode,
you cannot display the [u Setting] menu
by pressing the 3 button. If you try to
display the [u Setting] menu, - (key lock icon) and a message appear.
• When the camera is turned off in the s mode, it turns on in the
s mode next time the power switch is pressed.
* The s mode settings are as shown below.
Flash Mode
Drive Mode
Focus Mode
Information Display
Recorded Pixels
Quality Level
White Balance
Focusing Area
Sensitivity
EV Compensation
Digital Zoom
Instant Review
Sharpness
Saturation
Contrast
Date Imprint
*1 Can be set to a (Flash Off)
*2 Can be set to g (10 sec. Self-timer) or Z (2 sec. Self-timer). The
self-timer mode (10 sec. or 2 sec.) setting made in a shooting mode
other than s mode is available.
*3 Can be set to q (Macro), r (super macro) and 3 (Pan Focus)
*1
, (Auto)
*2
9 (Standard)
*3
= (Standard)
Standard
a
D (Better)
F (Auto)
J (Multiple)
Auto
±0.0
O (On)
1 sec
G (Standard)
G (Standard)
G (Standard)
P (Off)
Green mode must Green mode must
be canceled to use be canceled to use
this function. this function.
Auto Picture Auto Picture
38 38 38
4
67