Using The Remote Control Unit (Optional) - Pentax Optio 330 Operating Manual

Using the Remote Control Unit (optional)

You can take pictures using the wireless remote control unit
(optional).
z
Set the mode dial to
x
Press the
The self-timer lamp will blink and the
camera is ready to take pictures
using the remote control unit.
If you press the Zoom button on the
remote control unit, the zoom will
switch from [Tele] to [Normal] to
[Wide].
c
Press the shutter release button on the remote control
unit.
The self-timer lamp will blink rapidly and the picture will be
taken after approximately three seconds.
Playing Back Images
• The buttons on the camera can be used in the same way.
memo
• Please ensure that the remote control is no more than 5 meters
apart from the front of the camera.
x
z (
button twice.
p.53
)
or .
7/30/2001 7/30/2001
11:19 11:19
198 198
37