Selecting A Focus Mode; Manual Focus - Pentax Optio 330 Operating Manual

Pentax-computer equipment operating manual digital camera optio 330
Hide thumbs Also See for Optio 330:
Table of Contents

Advertisement

Selecting a Focus Mode

None
Auto
Macro Mode
Infinity-landscape mode This mode is used for taking distant objects.
Manual Focus Mode
z
Press the
The focus mode changes each time the button is pressed and
the setting is displayed on the LCD monitor.
The camera is ready to take the picture in the set focus mode.
The focus mode returns to [Auto] when the camera is turned off.
memo
If you take a picture while looking through the viewfinder when
Caution
the focus mode is set on Macro, the range of the resulting pic-
ture may differ from what was seen in the viewfinder.

Manual Focus

You can focus the camera on the subject manually when the mode
is set on
Four-way controller (
Four-way controller (
Saving the Manual Focus Position
The camera is focused on the subject in the focusing
area when the shutter release button is pressed halfway.
This mode is used when the distance to the subject is
approx. 14cm-50cm (0.46ft-1.64ft). The camera is
focused on the subject in the focusing area when the
shutter release button is pressed halfway.
The subject is brought into focus manually.
button in Capture mode.
.
)
increases the distance to the focusing position
)
decreases the distance to the focusing position
z
Four-way controller
p.52
41

Advertisement

Table of Contents
loading

Table of Contents