Pentax Optio 330 Operating Manual page 19

x
Select the display language.
1. Use the four-way controller (
or
guage.
2. Press the four-way controller
( ).
If you skip this operation, the menus and error messages
Caution
etc. will be displayed in English.
c
Select the nearest city in the time zone in which you will
use the camera.
1. Use the four-way controller (
2. Press the four-way controller (
3. Use the four-way controller (
) to enable (
(
4. Press the OK button.
The screen for setting the date
and time will be displayed.
v
Set the date and time.
1. Press the four-way controller (
year.
2. Press the four-way controller
( ).
and
above and below the month.
3. Repeat Steps 1 and 2 to change
the [month] [day] [hour] and
[minutes] and select the 12-hour
or 24-hour display format with the Display button.
4. When you have finished the settings, press the OK but-
ton when the clock reaches 00 seconds.
The screen confirming the settings will be displayed and the
camera is ready to take a picture.
You can change the settings after they have been made.
memo
Refer to "Changing the Display Language" (p.76), "Setting the
World Time" (p.74) and "Changing the Date/Time" (p.73).
) to select the display lan-
) or disable
) summer time.
will be displayed
Initial satting
Language/ English
City NYC
DST
MENU Exit OK
) to select the city.
).
Initial satting
Language/ English
City NYC
DST
Exit
MENU OK
) to change the
Date Adjust
1 / 1 / 2001
00 : 00
12/24
DISP MENU Exit OK
Ok
Ok
Ok
17