Using The Remote Control Unit (Optional) - Pentax OPTIO S5N Operating Manual

Using the Remote Control Unit (optional)

You can switch the Drive mode to Remote Control mode and take
pictures using the remote control unit E or F (optional).
4
Taking Pictures Using the Remote Control
1
Press the four-way controller (2) in
Capture mode to display
the LCD monitor.
The self-timer lamp blinks slowly and the
camera is ready to take the picture.
2
Press the shutter release button on the
remote control unit.
i The self-timer lamp blinks quickly and the picture is taken after
approximately three seconds.
h The picture is taken immediately.
Focusing may be compromised if you move the camera while the
self-timer lamp is blinking.
64
1
or h on
i
112 112 112
3/24/2005 3/24/2005 3/24/2005
12:00 12:00 12:00